Consulta de temas

How to Replace the Imaging Drum Cartridge on the C2665dnf Dell Laser Printer

Table of Contents:

  1. Removing the Drum Cartridge
  2. Installing a Drum Cartridge

This article provides information on "How to Replace the Imaging Drum Cartridge on the C2665dnf Dell Laser Printer"

1. Removing the Drum Cartridge

Replacing the Drum on the Dell 26xx and 37xx Laser Printers (0:59) - English Only

You need to replace all drum cartridges (yellow, magenta, cyan, and black) at a time.

WARNING: Before performing any of the following procedures, read and follow the safety instructions in the Important Information.
Caution: Protect the drum cartridges against bright light. If the right side cover remains open for more than three minutes, print quality may deteriorate.
  1. Open the right side cover.

  2. Turn the waste toner box lock lever 90-degrees counterclockwise to unlock the waste toner box.

  3. Grasp the handle on the waste toner box and pull it out making sure to hold it upright so that the waste toner does not spill out.

    Caution: Take care not to drop the waste toner box while you are removing it.
    After removing the waste toner box, do not touch the parts shown in the illustration. Toner can dirty or stain your hands.

  4. Stand the removed waste toner box upright on a level surface.

    WARNING: Never lay the waste toner box on its side as this may cause its malfunction or toner spills.

  5. Slightly pressing down the tab on the drum cartridge that you want to replace, pull it out halfway with one hand.

  6. Support the drum cartridge with the other hand from underneath, and then pull it out completely.

  7. Repeat the steps 5 and 6 to remove the other three cartridges.

More info can be found in the C2665dnf User’s Guide.

Back to Top

2. Installing A Drum Cartridge

  1. Unpack a new drum cartridge of the desired color.
  2. Remove the orange protective cover from the drum cartridge.

  3. Insert the drum cartridge into the associated cartridge slot, and then push until it stops.

  4. Repeat the steps 1 to 3 to insert the other three cartridges.
  5. Remove the cleaning rod from inside the printer.

  6. Remove the cleaning pad by pressing the white tabs between your thumb and index finger.

  7. Unpack a new cleaning pad.
  8. Attach the new cleaning pad to the cleaning rod.

  9. Insert the cleaning rod fully into one of the four holes until it clicks into the interior of the printer as illustrated below, and then pull it out.

  10. Repeat step 9 also on the other three holes. One time insertion is enough for each hole.
  11. Return the cleaning rod to its original location.

  12. Reinsert the removed waste toner box.

  13. Turn the waste toner box lock lever 90-degrees clockwise to lock the waste toner box.

  14. Close the right side cover.

More info can be found in the C2665dnf User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top

Identificación del artículo: SLN286373

Última fecha de modificación: 01/11/2018 07:35 AM

Califique este artículo

Fácil de comprender
¿Este artículo fue útil?
Envíenos sus comentarios
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Muchas gracias por sus comentarios.