OptiPlex FX160: Obtaining the Replacement Image

OptiPlex FX160: Obtaining the Replacement Image

Article Summary: Article describes information on Obtaining the Replacement Image for the OptiPlex FX160.

Table of Contents:
  1. Obtaining the Replacement Image


Obtaining the Replacement Image

Re-flashing the Image

In order to re-image the internal flash card hard drive, a bootable USB flash drive must be created with the image to be used. The system is then booted from the USB flash drive (instead of the internal flash card hard drive) and, after the opportunity to customize the deployment, copied to the internal flash card hard drive.

Obtaining the Replacement Image

The image is made available as a CD-ROM or as an ISO with the following contents:

You can also download from www.Dell.com/support drivers section under the Utilities section. Make sure you change the operating system to MS Windows XP Embedded.
  • An "Imaging Guide" PDFDocumentation for the process described below. Review this document for any future changes to the re-imaging process.
  • An image in .raw format to be written to USB flash driveThe filename on this image is currently Novell-SLETC-10-SP2-2-for-Dell.raw.
  • A Windows utility for writing the image to a USB flash driveThe filename is currently USBDiskImageTool.exe. This utility is not needed when creating the USB flash drive from within a Linux OS.
  • A directory of .rpm packagesfor the optional applications that can be managed from the Novell Add-on Manager

In order to access these files in a Windows environment if a CD-ROM is not already available it will be necessary to create one from the .iso file provided by Dell. Since Linux systems have the native ability to "loop-mount" and ISO image, on a Linux system the files can be accessed either from the CD-ROM or directly from the .iso file without the need to create a CD-ROM.

Click the button below to Tweet feedback or request assistance on anything in the above article. Twitter


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

문서 ID: SLN286363

최종 수정일: 12/11/2013 12:00 AM

이 문서 평가하기

이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

피드백을 보내주셔서 감사합니다.