Installing Windows Server using a USB solid state drive

Installing Windows Server using a USB solid state drive

Article Summary: This article provides information on installing Windows Server using a USB solid state drive (USB key) and diskpart.exe


1. Insert the USB solid state drive into a Windows computer.

2. Press the Windows Logo+R, type runas /user:administrator@domain.local cmd where domain.local is replaced by the name of the Active Directory domain and press Enter. The same task can be accomplished using the Command Prompt and Run as Administrator.

3. Type diskpart.exe and press Enter to open the diskpart.exe command interface.

4. Type list disk and press Enter to list the disks attached to the Windows computer. Note the disk number of the USB solid state drive.

5. Type select disk 3 and press Enter where disk 3 is the number of the disk noted in step 4.

Warning: The clean command in step 6 will completely erase the contents of the solid state drive.

6. Type clean and press Enter to erase the contents of the drive.

7. Type create paritition primary and press Enter to create a single primary partition encompassing the entire size of the solid state drive.

8. Type active and press Enter to mark the partition as active.

9. Type format fs=ntfs quick and press Enter to format the partition with the NTFS filesystem.

10. Type assign and press Enter to assign a drive letter to the solid state drive.

11. Copy the entire contents of the Windows Server DVD or .iso file to the solid state drive.

12. Insert the bootable USB solid state drive into a USB port on the PowerEdge server.

13. Power on the PowerEdge server.

14. Press F11 as the server is booting to invoke the Boot Manager.

15. Select Boot BIOS Menu, select Hard drive C:, select the USB key and press Enter to boot the PowerEdge server to the USB key.

Additional Information:

This information applies to Windows Server 2008, Windows Server 2008 R2, Windows Server 2012 and Windows Server 2012 R2.

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

문서 ID: HOW10243

최종 수정일: 08/28/2014 02:09 PM

이 문서 평가하기

이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

피드백을 보내주셔서 감사합니다.