The Power LED on most Dell Flat-Panel Monitors is located in the lower right corner on the front of the Display. Using the image below as a guide, choose what state the power LED is currently in (circled in red in Figure 1).
Figure 1: Location of the Power LED on Dell Flat-Panel Monitors
Follow the instructions below for the color of the Power LED your monitor has.
Confirm that a power cable is connected to the monitor and a power outlet.
Ensure the video cable is connected to the correct video source.
Laptop Computers: Determining the video source for Dell laptop computers is not an issue, as all of the video connectors use the same video card and additional video cards cannot be installed in the computer.
Desktop Computers: Look at the back of the computer (Figure 2) to check for any installed add-in video cards. Usually, integrated video cards are automatically disabled when an add-in video card is installed. The monitor must be connected to the add-in video card, if present.
Figure 2: Video Connectors On the Back of a Desktop Computer
|Numbers reference image above:|
|Display Port Connector|
|Integrated Video Card Connector|
|Add-in Video Card in Expansion Slot|
Ensure that the correct type of video cable is connected.
Display Port is a new digital standard for connecting monitors to computers and has the capability to provide a scalable digital display interface with optional audio and high-definition content protection (HDCP) capability. Display Ports usually resemble USB Ports with one side angled.
A Display Port cable should be used if Display Port connectors are available on both the computer and the monitor.
Digital Video Interface (DVI) is the digital standard for connecting monitors to computers. DVI connections are usually color-coded with white plastic and labels.
DVI cables provide a higher quality signal than VGA cables. A DVI cable should be used if DVI connectors are available on both the computer and the monitor.
Video Graphics Array (VGA) is the analog standard for connecting monitors to computers. VGA connections are commonly color-coded with blue plastic and labels.
A VGA cable should be used if DVI connectors are not available on either the monitor or the computer.
On most Dell monitors there is a Quick Access or Input button This button allows you to change your monitor to the selected Inputs such as: VGA, Digital/DVI, Display port and various other video input sources that your monitor may have.
Press the Quick Access or Input button to change to the correct video input source.
If you have completed the previous troubleshooting steps and your Monitor LED is on, and you are still not receiving video on your monitor. In some cases this may be due to the System not receiving power. Continue onto No Post No Power troubleshooting.
Contact Dell Technical Support.
문서 ID: SLN49334
최종 수정일: 06/26/2018 04:52 PM
피드백을 보내주셔서 감사합니다.