Firmware update using System Build and Update Utility (SBUU)

Firmware update using System Build and Update Utility (SBUU)


The Firmware Update module in SBUU enables you to update the BIOS and firmware versions of your Dell systems in a pre-operating system environment. This module:

  • Inventories your system
  • Enables you to select your own repository
  • Generates a comparison report
    NOTE: A comparison report is a comparison of the currently installed version of each component on the existing system with the repository component version for the same system.
  • Enables you to upgrade the system components

Updating Your System Firmware

  1. On the Dell Systems Build and Update Utility Home screen, click Firmware Update on the left pane.
    The Repository Selection screen is displayed. 
  2. Specify the location where the update files repository resides. The options available are:< >NFS ShareSMB ShareCD/DVD MediaUSBClick Continue.
    The comparison report is displayed on the Comparison Report screen.
    If the media is unavailable the following error message appears:
    Unable to recognize the media. It may be blank, damaged, or the format is not supported 
  3. Click OK and insert the media.
  4. Click Continue.
    NOTE: You can selectively upgrade components depending on your requirement. However, you cannot perform selective downgrades.
  5. Select any components that you want to upgrade and click Systems Build and Update Utility Home.
    NOTE: SBUU saves the information about the repository and the selections you made on the Comparison Report screen. These updates are applied during the actual deployment.
  6. To update your current system, click Apply/Export Configuration.
    The Configure Apply/Export Options screen is displayed.
  7. Select Apply Configuration to Current System and click Apply/Export.
    The progress bar is displayed after which your system reboots with the firmware updates configured.



Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Artikel-id: SLN285590

Laatste wijzigingsdatum: 08/22/2014 03:08 PM


Beoordeel dit artikel

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
Ja Nee
Stuur ons feedback
Opmerkingen mogen geen speciale tekens bevatten: <>() \
Excuses, ons feedbacksysteem is momenteel offline. Probeert u het later nog eens.

Hartelijk dank voor uw feedback.