T105 Motherboard System Board Jumpers Table Contains Wrong PCI 32-Bit Slot - Product Support Quick Note (PSQN) - 346611

Article Summary: T105 Motherboard System Board Jumpers Table Contains the Wrong PCI 32-bit Slot

Article Summary:

The T105 motherboard system board jumper table on the Dell Support website contains the wrong PCI 32-bit slot information.

---

Incorrect Connector 10 PCI 32-Bit Slot in System Jumpers Table

In the System Jumpers Table, the connector 10 Peripheral Component Interconnect (PCI) 32-bit slot is not correct. This is a documentation error. The correct PCI 32-bit slot notch should be close to the edge of the T105 motherboard.

---

PCI Slot Documentation Error

No action is needed. This article clarifies the PCI slot documentation error.

---

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.