Article Number: 000138210
H700 - I2C cannot find idle bus
Article Content
Symptoms
Issue:
Battery shown in state failed by monitoring software. OpenManage Server Administrator CLI shows battery state = failed / battery status = critical. RAID controller log of PERC H700 shows several of the following lines:
Solution:
I2C messages in the controller log refer to internal communication (to iDRAC for example) on the SMbus. These messages can be ignored.
Additional Information:
I2C 1 reset
I2C 1 cannot find idle bus!
I2C b PID 1 TIMEOUT!
I2C 1 reset
I2C messages in the controller log refer to internal communication (to iDRAC for example) on the SMbus. These messages can be ignored.
Article Properties
Affected Product
Servers, PowerEdge
Last Published Date
21 Feb 2021
Version
3
Article Type
Solution