Issues Creating an Image using Symantec Ghost on a Precision T3600

Issues Creating an Image using Symantec Ghost on a Precision T3600


Table of Contents:

  1. Issues Creating an Image using Symantec Ghost
  2. Solution

This article provides information on issues seen when creating an image using Symantec Ghost on a Precision T3600


1. Issues Creating an Image using Symantec Ghost

A user may report they are having problems creating an image using Symantec Ghost on their Precision T3600.
This issue mainly occurs when there is a PERC H310 adapter installed.

Back to Top


2. Solution


Please make sure you have the most up to date drivers installed for the PERC H310 card. Please refer to the www.dell.com/support/drivers to download the latest driver.

Also check the Symantec Support Site for any updates for your version of Ghost.
If you have the latest version of your software, have installed the latest drivers for the PERC card and you are still having issues creating an image, please refer to the Symantec Support Site for further assistance.

Back to Top





Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identyfikator artykułu: SLN155099

Data ostatniej modyfikacji: 11/23/2015 04:39 AM


Oceń ten artykuł

Trafne
Przydatne
Łatwe do zrozumienia
Czy ten artykuł był przydatny?
Tak Nie
Wyślij nam swoją opinię
Komentarze nie mogą zawierać znaków specjalnych: <>()\
Niestety, nasz system przekazywania opinii jest obecnie niedostępny. Spróbuj ponownie później.

Dziękujemy za uwagi.