Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Some article numbers may have changed. If this isn't what you're looking for, try searching all articles. Search articles

Edge Gateway 300x with Ubuntu cannot Wake On LAN from S5 state

Summary: How to resolve the Edge Gateway 300x with Ubuntu cannot Wake On LAN from S5 state issue.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content


Symptoms

Edge Gateway 300x with Ubuntu Core 16 – The system does not wake from S3/S4 using Magic Packet when WOWL (Wake on Wireless LAN) is enabled in the BIOS.


System Does Not Wake.

While deploying the Edge Gateway 300x with Ubuntu Core 16 you will notice that after enabling Wake on Wireless LAN (WOWL) in BIOS the system does not wake when sending a Magic Packet from S3/S4.


Cause

none

Resolution

Solution

This issue is caused by Wakeup General-purpose input/output (GPIO) being configured as active high (instead of active low).

Canonical has provided an update the kernel and Wireless Local Area Network (WLAN) driver that addresses this issue.

Connect the unit the Internet and allow automatic Over-the-Air (OTA) updates from the Ubuntu Snap Store.


Article Properties


Affected Product

Dell Edge Gateway 3000 Series, Dell Edge Gateway 3000 Series OEM Ready

Last Published Date

20 Feb 2024

Version

4

Article Type

Solution