База знаний

Why can I not upgrade Small Business Server 4.5 in a 2 GB Partition? - Technical Tip - 164585

Delete the Clients directory to Upgrade Small Business Server 4.5 in a 2 GB Partition.

  1. Start Windows NT® Explorer and expand the SmallBusiness directory.
  2. Right-click the Clients shared folder and choose Sharing.
  3. Click Not Shared and OK.
  4. Then right-click the Clients directory and choose Delete. This will free up approximately 400 MB, which is frequently enough space to allow the upgrade.

During the Small Business Server 4.5 install, redirect the Clients folder to another drive.

  1. During the install, redirect the Clients folder to another drive.
  2. Changing the drive location of a component is not intuitive. When you click on Change Folder during the install, the directory C:\ClientApps shows on the top line.
  3. Your impulse may be to change the drive letter here. That does not work. You must click on the list of drives below. For example, select D: and then D:\ appears as the directory.
  4. You then must type ClientApps after D:\.

There is not enough disk space to do the upgrade.

Small Business Server (SBS) 4.5 cannot upgrade over the factory install of SBS in a 2 GB partition. There is not enough space.


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN108991

Дата последнего изменения: 11/14/2010 12:00 AM

Оцените эту статью

Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.