Which PCI Slot Is Best For the 3Com EtherLink 10/100 PCI Network Interface Card? - KB Article - 162322

Which PCI Slot Is Best For the 3Com EtherLink 10/100 PCI Network Interface Card? - KB Article - 162322




Dell recommends PCI SLOT 1 for the NIC cards.

3Com PCI NICs (Network Interface Card) are designed to work in any PCI slot, including slave-only slots. The NICs perform best in those slots that support bus-mastering data transfers.

Dell recommends PCI SLOT 1 for the NIC cards. This slot is assigned to IRQ 11.

Please refer to your system documentation for graphics of your motherboard. You may also find graphics of your motherboard online at: Dell Support.



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN67074

Дата последнего изменения: 08/01/2010 12:00 AM


Оцените эту статью

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.