How to Set Paper Size and Type on the 3130cn / 3130cdn Dell Laser Printer

How to Set Paper Size and Type on the 3130cn / 3130cdn Dell Laser Printer


Table of Contents:

  1. Set on the Front Panel
  2. Set in the Printing Preferences Dialogue

This article provides information on "How to Set Paper Size and Type on the 3130cn / 3130cdn Dell Laser Printer"


1. Set on the Front Panel

For the Multipurpose Feeder.

  1. Press the Menu button.
  2. Press the Down arrow until Tray Settings is visible. Press Tick/Select to select.
  3. Select MPF.
  4. Select MPF Mode.
  5. Select Driver Specified.

For Tray 1 or 2.

  1. Press the Menu button.
  2. Press the Down arrow until Tray Settings is visible. Press Tick/Select to select.
  3. Select Tray 1 or Tray 2.
  4. Select Paper Type.
  5. Select the appropriate paper type from the available options. See the print media specs if you are unsure which option to select.
  6. Press the Left Arrow to go back a step in the menu.
  7. Select Paper Size.
  8. Select Auto.

More info can be found in the 3130cn User’s Guide.

Back to Top

2. Set in the Printing Preferences Dialogue

For the Multipurpose Feeder.

  1. Open the Printing Preferences dialogue.
  2. Set the Paper Source to MPF.

  3. Set the Paper Size and MPF Paper Type to match the media physically loaded. Click OK.

For Tray 1 or 2.

  1. Open the Printing Preferences dialogue.
  2. Set the Paper Source to Tray 1 or Tray 2.

  3. Set the Paper Size and Paper Type to match the media physically loaded. Click OK

More info can be found in the 3130cn User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



Identifikátor článku: SLN284906

Dátum poslednej zmeny: 08/03/2015 02:31 PM


Ohodnotiť tento článok

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme vám za pripomienky.