Databáza poznatkov

How to install TFTP Client







Article Summary: This article addresses how to install TFTP Client on a server running Windows Server 2012 R2 Core


Solution:

Perform the following steps to install TFTP Client on a server running Windows Server Core.

1. Type Start PowerShell in the Command Prompt window to start Windows PowerShell.

2. Type Install-WindowsFeature TFTP-Client and press Enter to install TFTP-Client.

Additional Information:

This information applies to Windows Server 2012 and Windows Server 2012 R2.

Additional information about TFTP Client can be found on TechNet.

TFTP Client commands can be found on TechNet.


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identifikátor článku: HOW10331

Dátum poslednej zmeny: 09/22/2014 03:44 PM


Ohodnotiť tento článok

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme vám za pripomienky.