PowerEdge 14G and Datacenter Scalable Solutions servers - How to register the iDRAC 9 embedded SupportAssist?

PowerEdge 14G and Datacenter Scalable Solutions servers - How to register the iDRAC 9 embedded SupportAssist?


This article explains how to register the SupportAssist module embedded in the internal Dell Remote Access Controllers version 9 (iDRAC9) of Dell PowerEdge 14G and Datacenter Scalable Solutins servers.

For enabling the automated, proactive and predictive features of SupportAssist for a system, a registration is required. Generating and saving a SupportAssist Collection locally or to a network share for maintenance purpose is possible even without registration.

Find additional information about your iDRAC in the User Manual matching to the installed firmware.


Prerequisites


For starting the registration process, the OS to BMC / iDRAC Pass-through must be enabled in the iDRAC connectivity settings.

Enable OS to BMC / iDRAC Pass-through

  1. After logging into the iDRAC web interface, go to Maintenance (Fig. 1)

  2. Now click on the Connectivity tab (Fig. 1)

  3. Enlarge the OS to iDRAC Pass-through section (Fig. 1) by clicking on it

  4. Set the State option to Enabled (Fig. 1)

iDRAC9_ OS_to iDRAC_Pass-trough
Fig. 1: Enabling the OS to BMC/iDRAC Pass-Through function


Registration Wizard


The SupportAssist Registration wizard (Fig. 2) will automatically start when you enter the SupportAssist section of the Maintenance tab in the iDRAC web interface.
If you cancel the wizard, the blue Register button in the upper left corner gives you the option to restart it.

iDRAC9_Support_Assist_Registration_Wizard
Fig. 2: iDRAC9 SupportAssist Registration Wizard



To complete the registration, enter the required Contact and Shipping Information.

  1. Primary Contact Information

    The Primary Contact is the first person to be informed when it comes to support related incidents.

    • First Name
    • Last Name
    • Phone Number
    • Alternate Number (if first contact phone number is not available)
    • Email Address
    • Service Address (physical address, where the device will be serviced or where replacement parts should be shipped)
    • Company Name
    • Adress (of Company / Contact)

  2. Secondary Contact Information

    Enter a Secondary Contact to ensure a proper flow of information in case unavailability of the Primary Contact.

    Note: You can remove or change the secondary contact information at any point of time.
    • First Name
    • Last Name
    • Phone Number
    • Alternate Number (if first contact phone number is not available)
    • Email Address

After accepting the End User License Agreement (EULA), check the summary if the details are displayed correctly.


Need more help?
Find additional PowerEdge and PowerVault articles

Visit and ask for support in our Communities

Create an online support Request




Identifikátor článku: SLN306712

Dátum poslednej zmeny: 10/19/2018 01:15 PM


Ohodnotiť tento článok

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme vám za pripomienky.