Databáza poznatkov

Error Code 90 is displayed after opening the door on the Dell™ PowerVault™ 122T autoloader. - Technical Tip - 132948


Reset the unit using the Operator control panel.

To resolve the error message, reset the unit using the Operator control panel by performing the following steps:

  1. From the Operator Control Panel Home Screen use the Next or Previous buttons on the control panel to cycle through the menu options.
  2. Select Configuration and press the Enter button.
    The Configuration submenu displays with Reset, Change SCSI ID, Code Update, Circular Mode, and Autoload Mode as available options.
  3. Select Reset and press the Enter button.
    The unit resets, and the error no longer displays.

NOTE: For more information on using the Operator Control Panel, consult the section titled Operating the Autoloader in the Dell PowerVault 122T User Documentation. This documentation is located either on the CD that came with the autoloader, or on the Internet at support.dell.com.



Opening autoloader door manually causes error.

Manually opening the autoloader door creates a mechanical error message:

Error! Code 90

To resolve the error, power the autoloader off and back on using the operator control panel on the front of the autoloader.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identifikátor článku: SLN85959

Dátum poslednej zmeny: 11/13/2010 12:00 AM


Ohodnotiť tento článok

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme vám za pripomienky.