Číslo článku: 000135939
Tlač
E-mail
Clolor Laser Printer 3110cn 3115cn Error 010-xxx
Obsah článku
Vlastnosti článku
Ohodnotiť tento článok
Je možné, že tento článok bol preložený automaticky. Ak máte nejaké pripomienky ku kvalite prekladu, pošlite nám ich prostredníctvom formulára naspodku stránky.
Obsah článku
Symptómy
Error
Troubleshooting
010-317 Insert Fuser
Power Cycle the Printer.
IF error still occurs, replace the fuser.
010-351 Replace Fuser
Power Cycle the Printer.
Print a Parameter Setting Report page on the Dell™ 3110cn printer.
To print a Parameter Setting Report, perform the following steps:
Power off the printer.
Close all printer covers and doors.
Hold down the up and down buttons on the printer and power the printer on.
Release your fingers from the keys when the message Diagnosing... appears. Customer Mode and ESS Diag are displayed.
Press the check button to select Customer Mode.
Press the up or down button until Parameter appears and press the check button. On the LCD, the Parameter menu appears.
Press the up or down button until Print appears and press the check button. The Parameter Setting Report prints.
Press the Cancel button to stop the test.
IF, the Life of Fuser (paper feeding count) has reached replacement time of 100,000 pages, replace the fuser.
IF, the Life of Fuser (paper feeding count) has not reached replacement time of 100,000 pages, reseat the fuser.
IF the error still occurs, replace the fuser.
010-354 Restart Printer
010-377 Restart Printer 010-378 Restart Printer 010-379 Restart Printer 010-380 Restart Printer 010-381 Restart Printer 010-382 Restart Printer 010-383 Restart Printer 010-384 Restart Printer 010-385 Restart Printer 010-386 Restart Printer 010-387 Restart Printer 010-388 Restart Printer 010-389 Restart Printer 010-390 Restart Printer 010-391 Restart Printer 010-392 Restart Printer 010-393 Restart Printer 010-394 Restart Printer 010-395 Restart Printer
Power Cycle the Printer.
Vlastnosti článku
Dotknutý produkt
Dell 3110cn Color Laser Printer, Dell 3115cn Color Laser Printer
Dátum posledného zverejnenia
21 feb 2021
Verzia
3
Typ článku
Solution