Databáza poznatkov

5.1 Speakers Do Not Mute When Microphone is Connected to Back Connector on Dell™ XPS™ and Dimension™ Systems - Product Support Quick Note (PSQN) - 292418

Speakers Are Not Muting When Headphones Are Connected

When headphones are connected in the front panel of Dimension E510, 5150, 5150C, 9150 or XPS 200 and 400 systems, all with onboard sound, the 5.1 speakers might not mute. Also with these systems, the microphone is connected to the back connector of the system.

Switch the microphone connection to the front of the computer.

Switch the microphone connection from the back of the computer to the microphone connector on the front of the computer . The speakers will mute properly when the microphone is connected to the front jack. (Figure 1)

Figure 1 - Microphone Connector on the Front of the XPS 200 System

NOTE: This problem is not observed when using 2.1 speakers.

Visit the Dell Community Forum for More Information

Visit the Dell Community Forums to find out what others in the Dell user community are saying. The Dell Community Forums provide a place for Dell users to discuss support topics, to learn, and to help each other. Use the message boards to post questions and answers.

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identifikátor článku: SLN130889

Dátum poslednej zmeny: 06/17/2009 12:00 AM

Ohodnotiť tento článok

Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme vám za pripomienky.