Databáza poznatkov

How to reset the BIOS of a Dell PowerEdge Server?


Note: This article is part of the Server Tutorials: Support Tools, available here.
This article explains how to restore the BIOS defaults settings on a Dell PowerEdge Server. This procedure may be valid for other Dell products.
  1. Power on the system.
  2. While the blue Dell logo is visible, press the < F2 > key to enter the System Setup.




  3. Enter the "System BIOS" section


  4. Click on the button "Default" in the low end corner.



  5. A popup will ask the confirmation of action, press "Yes".

  6. The BIOS settings are now reset.
If it doesn't work try the following sequence:
  • Press the < Num Lock > key, and verify that the Num Lock light is on.
  • Press the < Caps Lock > key, and verify that the Caps Lock light is on.
  • Press the < Scroll Lock > key, and verify that the Scroll Lock light is on. The lights on the keyboard should all be illuminated as in Figure 1.
  • Press the < Alt >+< F > keys at the same time. The system will beep as the setup defaults are restored.








Need more help?
Find additional PowerEdge and PowerVault articles

Visit and ask for support in our Communities

Create an online support Request


Identifikátor článku: SLN302725

Dátum poslednej zmeny: 07/23/2018 08:28 AM


Ohodnotiť tento článok

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme vám za pripomienky.