How to reset the BIOS of a Dell PowerEdge Server?

How to reset the BIOS of a Dell PowerEdge Server?


Note: This article is part of the Server Tutorials: Support Tools, available here.
This article explains how to restore the BIOS defaults settings on a Dell PowerEdge Server. This procedure may be valid for other Dell products.
  1. Power on the system.
  2. While the blue Dell logo is visible, press the < F2 > key to enter the System Setup.




  3. Enter the "System BIOS" section


  4. Click on the button "Default" in the low end corner.



  5. A popup will ask the confirmation of action, press "Yes".

  6. The BIOS settings are now reset.
If it doesn't work try the following sequence:
  • Press the < Num Lock > key, and verify that the Num Lock light is on.
  • Press the < Caps Lock > key, and verify that the Caps Lock light is on.
  • Press the < Scroll Lock > key, and verify that the Scroll Lock light is on. The lights on the keyboard should all be illuminated as in Figure 1.
  • Press the < Alt >+< F > keys at the same time. The system will beep as the setup defaults are restored.








Need more help?
Find additional PowerEdge and PowerVault articles

Visit and ask for support in our Communities

Create an online support Request


ID de l'article : SLN302725

Date de la dernière modification : 07/23/2018 08:28 AM


Noter cet article

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
Oui Non
Envoyez-nous vos commentaires
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\
Désolé, notre système de collecte des commentaires est actuellement indisponible. Veuillez réessayer ultérieurement.

Merci pour vos commentaires.