Knowledge Base

No Power on the Dell 3110cn or 3115cn Color Laser Printer

  1. Turn the printer on and verify that it is making noise on startup.

  2. If warm up noise is heard but nothing is coming up on the Operator Panel, Contact Technical Support.

  3. If there is no noise during startup, make sure the printer is plugged directly into a known good wall outlet.

  4. If it is still not working, swap with a known-good power cable from a working monitor or computer.

  5. If there is still no power to the printer, Contact Technical Support.

Article ID: SLN122984

Last Date Modified: 02/25/2011 12:00 AM

Rate this article

Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.