Knowledge Base

No Sound From PowerDVD 8.2 While Using HDMI Output Device

Table of Contents:

  1. No Sound From PowerDVD 8.2 While Using HDMI
  2. Resolution

This article provides information on No Sound From PowerDVD 8.2 While Using HDMI

No Sound From PowerDVD 8.2 While Using HDMI

A user may report that when playing media through an HDMI device (such as a digital TV or home theatre receiver), PowerDVD 8.2 video playback software may give no sound, while the device can successfully output sound using another application.

Back to Top


Make sure the audio output is set to HDMI Output.

  • Open PowerDVD.
  • Navigate to Settings.
  • Open Audio Settings.
  • Select Speaker Environment.
  • Change to HDMI Output and click Apply.

Back to Top

If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN132885

Last Date Modified: 01/29/2015 10:22 AM

Rate this article

Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.