E-Flat Panel Stand - Visual Guide to your Stand

E-Flat Panel Stand - Visual Guide to your Stand


Note: For a more detailed description about each location, please go to the system manuals at www.dell.com/support

The following article is a visual guide that lists the external ports and features of your E-Flat Panel Stand.


Table of Contents:

  1. Front View
  2. Rear View
  3. Left View
  4. Right View
  5. Additional Information:

Front View

Front View

(Fig.1 Front View)

1 Monitor Attachment Plate 2 Riser
3 Monitor Weight Adjustment 4 Monitor Weight Adjustment Tool
5 Release Tab for Port Replicator


Back to Top


Rear View

Rear View

(Fig.2 Rear View)

1 Guide Posts for Port Replicator 2 Release Button for Port Replicator


Back to Top


Left View

Left Hand Side View

(Fig.3 Left Hand Side View)

1 Monitor Attachment Plate 2 Riser
3 Base


Back to Top


Right View

Right Hand Side View

(Fig.4 Right Hand Side View)

1 Monitor Attachment Plate 2 Riser
3 Base


Back to Top


Additional Information:


Back to Top






Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN284925

Last Date Modified: 09/14/2019 04:49 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.