Dell EMC PowerEdge MX Series Fibre Channel Storage Network Deployment with Ethernet IOMs

Dell EMC PowerEdge MX Series Fibre Channel Storage Network Deployment with Ethernet IOMs




Published November 2018 (Updated April 2019)


This document provides the deployment steps for configuring PowerEdge MX-series networking switches (MX9116n FSE and MX5108n) in SmartFabric mode to attach external FC storage. Examples include FCoE FIP Snooping Bridge (FSB), NPIV Proxy Gateway (NPG), and Direct Connect of FC storage devices.

Caution: The information provided in this document does not contain the latest information. This guide is now integrated into the Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide, which has a more recent revision than this document. Dell EMC recommends that you reference the Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide for the most current deployment and configuration information.


Download (read caution before downloading)


For more related Networking Guides click here to return to our main page





Article ID: SLN314800

Last Date Modified: 10/07/2019 01:29 PM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.