Using the Virtual Media function on iDRAC 6, 7, 8 and 9

Using the Virtual Media function on iDRAC 6, 7, 8 and 9


The Virtual Media function allows the remote usage of software image files (ISO-files), which can be used for installing operating systems or updating servers. This article provides information on using the Virtual Media function of the Integrated Dell Remote Access Controller (iDRAC) in version 6, 7, 8 and 9.

The benefits of using the Virtual Media function are as follows:
  • Update all server firmware using the matching bootable image (ISO-file) for your server from this article.
  • Install an Operating System on your server directly from the ISO. Read this article for more information.
  • View video output from the server and use the local mouse and keyboard as if you were in the same room.
If you want to find more detailed information about this and other functions available through the Enterprise iDRAC please proceed to the iDRAC manuals.


Note: An Enterprise license (iDRAC 7, 8 and 9) or Enterprise module (iDRAC 6) is needed to access this function
Note: With iDRAC7 firmware version 1.30.30 the interface changed from old (iDRAC 6 - style) to new (iDRAC 8 - style)


Select your iDRAC version


iDRAC 9

Please follow the directions below to use the virtual media function on iDRAC9:

  1. Obtain the IP address and Login details of the iDRAC of the server you wish to attach virtual media to.
    If your iDRAC has not previously been used it must first be configured. You can find how to do this here.
  2. Login in to the iDRAC using the IP on your preferred browser
  3. Click Launch Virtual Console from iDRAC web interface (Fig. 1)
  4. Click Connect Virtual Media for activating the function (Fig. 1)


    Fig. 1: iDRAC9 GUI

  5. Click on Virtual Media and browse to the device you want to pass through. In this example, we choose Map CD/DVD for the usage of an image (ISO-file).
  6. Browse to the ISO location, choose the ISO and click Map Device.


    Fig. 2: iDRAC9 Virtual Media GUI

  7. Click Boot
  8. Choose Virtual CD/DVD/ISO


    Fig. 3: iDRAC9 Boot Controls

  9. Confirm the boot action by clicking Yes


    Fig. 4: iDRAC9 Boot Controls

  10. The system will reboot and shows "Virtual CD boot Requested by iDRAC". The installation interface will then be displayed.


    Fig. 5: iDRAC9 Hardware Boot Screen

  11. Please follow system prompts as normal.
  12. Once you have finished the installation we recommend disconnecting virtual media.



iDRAC7 (> 1.30.30 ) and iDRAC 8

Please follow the directions below to use the virtual media function on iDRAC8 and iDRAC7:

  1. Open the Virtual Console from iDRAC web interface. Click on Virtual Media and choose Connect Virtual Media for activating the function.
    iDRAC Virtual Media
    Fig 6: iDRAC8 Connect Virtual Media

Example with Map CD/DVD
Example with Map Removable Disk (USB key mapping)


Example with Map CD/DVD
  1. Click on Virtual Media and select the device you want to pass through. In this example, we choose Map CD/DVD for the usage of an image (ISO-file).
    iDRAC Virtual Media
    Fig 7: iDRAC8 Select Media
  2. Select the drive of the local system or the image file you want to pass through by clicking on Browse.
    iDRAC Virtual Media
    Fig 8: iDRAC8 Select source
  3. If you want to pass through an image, select the file and click on Open.
    iDRAC Virtual Media
    Fig 9: iDRAC8 Select file
  4. Click on Map Device for finishing the source selection. The selected device is now visible in the Operating System and can be used as boot source if supported.
    iDRAC Virtual Media
    Fig 10: iDRAC8 Mapping the source device
  5. For booting from the selected device you can click on Next Boot and choose Virtual CD/DVD/ISO. After a restart, the server will start from this source automatically.
    iDRAC Virtual Media
    Fig 11: iDRAC8 Next Boot selection

    Example with USB key mapping

Note: USB Drive mapping requires the use of Java connection mode.

Mapping a Removable Disk allows to mount a USB key on the remote server and use the files.
  1. Click on Virtual Media and select the device you want to pass through. In this example, we choose Map Removable Disk

    Fig 12: iDRAC8 Select Media
  2. Select the drive of the local USB key and press Map Device

    Fig 13: iDRAC8 Select USB Drive

Once the USB drive is virtually mapped, the drive will appear in the server's device list.

Fig 14: iDRAC8 Server Device List

Please follow the directions below to use the virtual media function on iDRAC6 and iDRAC7:

  1. Open the Virtual Console from iDRAC web interface.
    iDRAC Virtual Media
    Fig 15: iDRAC6 & iDRAC7 Virtual Console
  2. Click on Virtual Media and choose Launch Virtual Media.
    iDRAC Virtual Media
    Fig 16: iDRAC6 & iDRAC7 Launch Virtual Media
  3. Now you see the management window. Click on Add Image for opening the selection window.
    iDRAC Virtual Media
    Fig 17: iDRAC6 & iDRAC7 Management Window
  4. Select the image (ISO-file) you want to use as virtual media and click Open.
    iDRAC Virtual Media
    Fig 18: iDRAC6 & iDRAC7 Image file selection
  5. Check the Mapped checkbox for associating the selected file as virtual device and pass it through to the server. The selected device is now visible in the Operating System and can be used as boot source if supported (Restart server and press F11 for entering the boot manager).
    iDRAC Virtual Media
    Fig 19: iDRAC6 & iDRAC7 Mapping the image file
Note: Do not close the management window as long as you want to use the file/device association.

Video:





Need more help?
Find additional PowerEdge and PowerVault articles
Watch Part Replacement Videos for Enterprise products

Visit and ask for support in our Communities

Create an online support Request






Article ID: SLN296648

Last Date Modified: 05/16/2019 07:50 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.