Killer N1535 Wireless Firmware Manual Update Guide for Ubuntu Systems

Killer N1535 Wireless Firmware Manual Update Guide for Ubuntu Systems



Table of Contents:

  1. Linux Firmware Package
  2. Ubuntu: Killer N1535 Wireless

Linux Firmware Package

Linux-Firmware (w/ Killer N1535) Update Process

Update your system with the following commands:
sudo apt-get update
sudo apt-get upgrade

Note: To determine the current linux-firmware package available please vist: http://mirrors.kernel.org/ubuntu/pool/main/l/linux-firmware External Link

Back to Top

Ubuntu: Killer N1535 Wireless

Killer N1535 Manual Firmware Update Process

  1. In a terminal, confirm the QCA6174 with this command (Figure 1): sudo lspci | grep –i qca6174

    Figure 1
  2. Download the latest firmware and extract the contents: https://codeload.github.com/kvalo/ath10k-firmware/zip/master External Link
  3. Or you can download the ZIP and save it with the browser at this url as shown: https://github.com/kvalo/ath10k-firmware (Figure 2)

    Figure 2
  4. Open the "Downloads" folder, then "right click" the "ath10k-firmware-master.zip" and "extract here".
  5. Confirm the contents of the extracted folder as shown. You should see the "QCA6174" folder (Figure 3).

    Figure 3
  6. Back in a terminal, type "sudo nautilus" to open a root privilege file manager (Figure 4).
    1. Sudo nautilus
    2. Click on "computer"
    3. Click on folder "lib"

    Figure 4
  7. Navigate to the QCA6174 firmware directory (Figure 5).
    1. Click on "firmware"
    2. Click to open "ath10k"
    3. Right click & "Delete" the "QCA6174" directory (we are removing everything).

    Figure 5
  8. Navigate to your other file manager window where your extracted download folder is (Figure 6):
    1. Confirm your new source file location in Downloads/auth10k-firmware
    2. Confirm your new destination file location in ../firmware/ath10k
    3. Copy & paste the QCA6174 directory with all of its contents into the destination directory as shown. The path should be: /lib/firmware/ath10k/

    Figure 6
  9. Open /lib/firmware/ath10k/QCA6174/HW3.0 and rename file: firmware-4.bin_wlan.rm.2.0-00180-qcarmswpz-1 To: firmware-4.bin (Figure 7)

    Figure 7
  10. Now reboot and test your new Killer Wi-Fi firmware.

Back to Top




Article ID: SLN306440

Last Date Modified: 05/23/2019 04:07 PM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.