How to upgrade the firmware and NVSRAM on PowerVault MD32x0 and MD36x0 arrays

How to upgrade the firmware and NVSRAM on PowerVault MD32x0 and MD36x0 arrays


Downloading the latest Firmware and NVSRAM

Click here and download the latest RAID Controller Firmware and NVSRAM for your MD Storage Controller. Both the RAID controller Firmware and NVSRAM will be contained in one zip file.
IMPORTANT: It is highly recommended to back up your database prior to performing any firmware and/or NVSRAM upgrade operations on your Storage Controller.


Upgrading the Firmware and/or NVSRAM

On the download page of the latest firmware and NVSRAM, expand the ‘Installation Instructions’ section at the bottom and follow the steps to upgrade the firmware and/or NVSRAM.
IMPORTANT: It is highly recommended to gather support information from the "Support" tab of the MD Storage Manager prior to performing any firmware upgrade operations. This can also be achieved through the smcli using the 'save storageArray supportData file="filename"' command.



Article ID: SLN310379

Last Date Modified: 11/06/2018 12:42 PM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.