Data and Server Migration with Double-Take Move

Data and Server Migration with Double-Take Move


The following videos demonstrate how to migrate Data and entire Servers, using Double-Take Move v5.3.

1. Data/Storage Migration with Double-Take Move


YouTube Video 1: Data/Storage Migration with Double-Take Move

Data and Server Migration
Figure 1: Data replicate and migration

2. Server Migration with Double-Take Move



YouTube Video 2 : Server Migration with Double-Take Move
Data and Server Migration
Figure 2: Server replicate and migration

Basic Requirements

Source Server: Physical or Virtual, 32-bit or 64-bit
Windows Server 2003 wSP1 or later, Windows 2008 Server, Windows 2008 R2 Server

Target Server: Physical or Virtual, 32-bit or 64 bit
Windows Server 2003 wSP1 or later, Windows 2008 Server, Windows 2008 R2 Server

Operating System of source and target should match. (W2003-to-W2003, W2008-to-W2008) and the bit-level should also match.
Server migration: Target server drives should match those of the source server (matching drive letters, adequate storage space available on each drive) but the server & storage hardware does not need to match.





Article ID: SLN310447

Last Date Modified: 08/08/2018 05:18 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.