Knowledge Base

FN IOM Easy Deployment Guide


FN IOMs include the Dell PowerEdge FN410S, FN410T, and FN2210S in the PowerEdge FX2 chassis.

This deployment guide provides configuration examples for common upstream switches to establish a functional uplink and bring up the network ports on PowerEdge FC-Series servers (FC830, FC630, etc.) in three easy steps:
  • Ensure the FN IOM is at its factory default settings.
  • Create an LACP port channel on the upstream switch.
  • Verify that connected FN IOM ports are up.

This guide also provides instructions for accessing the FNIOM's CLI and GUI interfaces.
http://downloads.dell.com/solutions/networking-solution-resources/FN%20IOM%20Easy%20Deployment%20Guide%20v2.0.pdf


Article ID: SLN310616

Last Date Modified: 08/14/2018 04:42 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.