Dell Remote Access Configuration Tool (DRACT)

Dell Remote Access Configuration Tool (DRACT)


Overview

Dell Remote Access Configuration Tool (DRACT) discovers and configures Remote Access Controllers (RACs) for systems on your network from a single console. You can use this tool to perform the following:
  • Discover or import RAC IP addresses on the network.
  • Update firmware for selected RAC IP addresses.
  • Configure standard or extended schema-based Active Directory (AD) settings for selected RAC IP addresses.
  • Create RAC objects on the AD server for extended schema-based AD.
Access Configuration
Figure 1: Access Configuration

Supported iDRAC's

DRACT supports the following types of RACs that support RACADM commands:
  • Integrated Dell Remote Access Controller 8 (iDRAC8)
  • Integrated Dell Remote Access Controller 7 (iDRAC7)
  • Integrated Dell Remote Access Controller 6 (iDRAC6) Enterprise for rack and tower servers
  • Integrated Dell Remote Access Controller 6 (iDRAC6) Enterprise for blade servers
  • Chassis Management Controller (CMC) for Dell PowerEdge M1000e and PowerEdge VRTX
  • Dell Remote Access Controller 5 (DRAC5)

Documentation

Download

Dell DRAC Tools 1.2



Article ID: SLN310707

Last Date Modified: 08/10/2018 02:18 PM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.