Rapid EqualLogic Configuration portal

Rapid EqualLogic Configuration portal

The Dell Rapid EqualLogic Configuration (REC) portal is a collection of documents intended to assist users in deploying Dell PS Series (EqualLogic) iSCSI SAN solutions. The following documents employ tested and proven, Dell EMC best practices for PS Series SAN environments. Use the links in each appropriate section to obtain the latest host, switch, and array configuration guides that pertain to your system (latest revision dates shown in parentheses).
Note: The following site is for registered Dell PS Series customers and requires a login. If you do not already have a login, click Create Account on the following site.

Full product documentation can be found at http://eqlsupport.dell.com.

Complete the configuration steps in the following order as numbered.

Step 1: Preparation (select the link that matches your configuration)

Step 2: Switch configuration (select one)

Step 3: Array configuration

Step 4: Host configuration (select one)

Step 5: Monitoring and validating

IMPORTANT: Contact Dell support (EqualLogic support site) when:
  • Deployment is complete to finalize your remote deployment and configuration checklist, or
  • If there are any questions about your PS Series iSCSI SAN configuration.
To provide feedback pertaining to the documentation found here, please email us at StorageSolutionsFeedback@dell.com.

Additional Dell EMC storage documentation:

Article ID: SLN310737

Last Date Modified: 01/09/2019 01:49 PM

Rate this article

Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.