This post offers guidance towards setting up HP Operations Manager (HPOM) for agent-free monitoring of 12th Generation Dell PowerEdge Servers. Dell PowerEdge 12th Generation servers are equipped with integrated Dell Remote Access Controller, version 7 (iDRAC7) with Lifecycle Controller (LC), an innovative agent-free systems management solution, which automates day-to-day IT management functions. With iDRAC7, you can monitor, troubleshoot and remediate servers, receive server issue alerts with improved error messaging, and remove any dependency on operating systems or in-band management agents such as that provided by Dell’s legacy OpenManage Server Administrator (OMSA). The Dell embedded technology, at the core of iDRAC7 with LC, empowers agent-free manageability that greatly simplifies IT tasks.
Agent-Free monitoring provides these benefits:
Agent-Free monitoring of Dell servers is a licensed feature in Dell Smart Plug-in (SPI) version 3.0. It offers out-of-band monitoring of 12th generation Dell PowerEdge servers via their embedded management component, the iDRAC7 with LC.
To set up an iDRAC7 as a managed node to monitor the corresponding Dell server in out-of-band mode from HP Operations Manager, you need to do the following steps:
Please refer to the Links section of this document for the iDRAC7 installation guide.
Installing Dell SPI:
To install the Dell Smart Plug-in (SPI) version 3.0 on an HPOM management server:
The Dell SPI Licenses are different from iDRAC7 licenses. For purchasing these licenses, please contact your local Dell sales representative.
Licenses are required to use the Agent free monitoring feature of Dell SPI for HP OM; these licenses are different from iDRAC7 licenses. They may be purchased from Dell Sales, and will be delivered to you via email, or you can download them from the Dell online portals.
To use the licenses, you will need to install the Dell Connections License Manager. This product is used for distributing licenses to all Dell Connections products deployed at a customer site. If you already have a Dell Connections License Manager (DCLM), simply import the purchased Agent-Free monitoring HPOM SPI licenses into it. If you do not have one, setup a new Dell Connections License Manager using the instruction manuals at support.dell.com. Refer the Links section.
The Dell SPI Config Utility can be used to configure the DCLM configuration parameters such as username, password and Web service URL.
The default location is C:\Program Files\Dell\OpenManage Connection for HP.
Now set the Dell connections license manager web services parameters. For this, you need the following:
DellSPIConfigUtility.exe -dclmwebserviceurl=http://10.94.149.110:8543/ -dclmusername= mycompany\dellspiuser
Figure1: Configuration Utility
For monitoring Dell servers through the iDRAC7 device, you need to configure the iDRAC7 IP address as either a Managed Node or an External Node with the required details via the Node Editor as per HP Operations Manager guidelines. Once the node details are updated, save and close the Node editor. Please confirm that the iDRAC7 node is successfully added in the HPOM console.
Figure2: Adding nodes for monitoring (from Node Editor):
The HPOM framework provides scheduled task policies which allow you to schedule commands to run on the management station.
The scheduled task policy "Policy management->Policy groups->SPI for Dell Devices ->Dell Hardware Autogroup Policy" is used to classify the Dell devices in the HPOM console. The default interval of this policy is once a week on Sundays at 04:00.
Figure3:Deploying the Dell SPI Autogrouping Policy:
Once you acquire the license using the Dell Connections License Manager configuration, you can change the interval to any time as required and deploy the policy manually as per the HPOM guidelines to classify the iDRAC7 devices in the console. Please ensure the policy is updated to the latest version once the modification is done, and deploy the latest version of the policy to the HPOM Management Server. Once the policy is deployed successfully, the policy will be executed at the scheduled interval and the iDRAC7 device will be classified in the HPOM console.
The scheduled task policy "Policy management->Policy groups->SPI for Dell Devices->Dell Server->Dell Server Scheduled Status Poll" is used for periodic monitoring of Dell Servers. The default interval of this policy is once per day.
Figure4: Deploying the Out of Band Server Health Monitoring Policy
Once the classification is done, you can change the interval to any time desired, and then deploy the policy manually per the HPOM guidelines. Please make sure the policy is updated to the latest version once the modification is done and then deploy the latest version of the policy to the HPOM Management Station. Once the policy is deployed successfully, the policy will be executed at the scheduled interval and the health status message will be generated and associated to the iDRAC7 Global System Service ID.
The SNMP Interceptor policy "Policy management->Policy groups->SPI for Dell Devices->Dell Server->Dell OOB Server Traps (Manual Ack)" is used for supporting server traps. Server SNMP Traps are intercepted by this policy and the corresponding alert messages are generated in the HPOM console and will be associated to the corresponding Managed Node in the node hierarchy.
|1||iDRAC7 manuals||Provides information on setting up the iDRAC7 managed node. The manuals available @ http://support.dell.com/support/edocs/software/smdrac3/idrac7/1.20.20/en/index.htm|
|2||Dell Connections License Manager Installation Guide||Provides information on software prerequisites and requirements to install and uninstall Dell Connections License Manager. This is available at support.dell.com @http://support.dell.com/support/edocs/software/smconect/clm/|
Article ID: SLN312254
Last Date Modified: 08/13/2018 08:28 AM
Thank you for your feedback.