Dell Wyse Windows XPe - How to change the computer name?

Dell Wyse Windows XPe - How to change the computer name?


Instructions to change the computer name of a Windows XPe or Windows Embedded Standard (WES) Desktop:
  1. Turn on the XPe client and login as Administrator.
  2. Disable the Write Filter. This will reboot your unit.
  3. Login as Administrator.
  4. Open Control Panel.
  5. Select System icon.
  6. Select the Computer Name tab under the System Properties utility.
  7. Select the Change button.
  8. Under the Computer Name box, enter the new name for the thin client.
  9. When complete, press the OK button to save.
  10. Press the OK button in the System Properties utility.
  11. Reboot the thin client.
  12. Login as Administrator.
  13. Verify the new name (Go to step 4). If this is correct Enable the Write Filter. This will reboot your unit.
  14. Process complete.




Article ID: SLN291254

Last Date Modified: 06/08/2018 08:06 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.