Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Número del artículo: 000135321


035-xxx Fax Errors on the Dell 3115cn Printer

Contenido del artículo


Síntomas

Table of Contents:

  1. Confirm the Telephone Line is Functional
  2. Check Fax Cable is Correctly Inserted
  3. Reset Fax Defaults
  4. Replace Fax Cable if Available
  5. Disconnect other Devices
  6. Disable Error Correction Mode (ECM)
  7. Lower the Modem Speed (Baud Rate)


Confirm the Telephone Line is Functional

To confirm the telephone line is functional:
  1. Disconnect the fax cable from the the telephone wall socket.
  2. Using a telephone handset confirm outbound calls can be made and inbound calls answered.
  3. If unable to make/receive calls or there is excess noise on the line contact your service provider to resolve.

Back to Top


Check Fax Cable is Correctly Inserted

Ensure the fax cable is securely connected to the socket marked "Fax" and the telephone wall socket.

Back to Top


Reset Fax Defaults

To reset fax defaults:
  1. Switch off the printer.
  2. Press and hold the Menu, Left Arrow and Right Arrow keys, with these keys still depressed switch the printer on.
  3. When prompted for "C.E Mode Password", press Up, Up, Tick/Select.
  4. Select "Fax/Scanner Diag".
  5. Select "Backup Data".
  6. Select "All Clear".
  7. When prompted select your country from the list.
  8. When "Completed" is displayed restart the printer and attempt to send or receive a fax.

Back to Top


Replace Fax Cable if Available

If an alternative fax cable is available, test using this.

Back to Top


Disconnect other Devices

Other devices on the line may cause issues. Disconnect other devices such as telephone handsets, ADSL modems, card payment processing devices etc.

Back to Top


Disable Error Correction Mode (ECM)

To disable ECM:
  1. Switch off the printer.
  2. Press and hold the Up and Down arrows on the printer keypad.
  3. With the keys still depressed switch the power back on.
  4. Select "Fax/Scanner Diag".
  5. Select "Parameter".
  6. Select "Fax Parameter".
  7. Select "Capability ECM".
  8. Select "Disable". An asterisk will appear next to disable to indicate this option has been selected.
  9. Restart the printer and attempt to send or receive a fax.

Back to Top


Lower the Modem Speed (Baud Rate)

Ordered List
  1. Switch off the printer.
  2. Press and hold the Up and Down arrows on the printer keypad.
  3. With the keys still depressed switch the power back on.
  4. Select "Fax/Scanner Diag".
  5. Select "Parameter".
  6. Select "Fax Parameter".
  7. Select "G3M Baud Rate Fix".
  8. Select "9600bps". An asterisk will appear next to disable to indicate this option has been selected.
  9. Restart the printer and attempt to send or receive a fax.
  10. If successful at this speed try increasing the speed to find the maximum transmission rate possible.

Back to Top


Click the button below to Tweet feedback or request assistance on anything in the above article.

Propiedades del artículo


Producto comprometido

Dell 3115cn Color Laser Printer

Fecha de la última publicación

10 abr 2021

Versión

3

Tipo de artículo

Solution