In this video, we will show how to enable and disable a RAID controller on a Dell 12th generation VRTX chassis. First, ensure that all the servers are turned off before enabling or disabling the controller. To begin the process, launch the VRTX login page. Provide your username and password, and then click Submit. Note that you can enable or disable both the external controllers available in slot 5 or slot 6.
But for internal controllers only integrated controller 2 can be enabled or disabled. To disable the controller, in the left pane, navigate to Storage, Controllers, and then click Troubleshooting. From the Actions drop-down menu, select Disable RAID Controller, and then click Apply. If you try to disable the controller when the server is turned on, a message is displayed to turn off the server. Klicken Sie auf OK.
To turn off the servers, in the left pane, click Server Overview, and click Power. From the Operation Assign to all servers drop-down menu, select Power Off Server, click Apply, and then click OK. After the operation is successful, click OK. Again, click Controllers, and then click Troubleshooting.
From the Actions drop-down menu, select Disable RAID Controller, click Apply, and then click OK. After the operation is successful, click OK. Das System wird neu gestartet. Beachten Sie, dass dieser Vorgang eine Weile dauern kann. After the system reboots, you can see that the controller is disabled.
Before enabling the controller, again ensure that the server is turned off. To enable the controller, in the left pane, navigate to Storage, Controllers, and then click Troubleshooting. From the Actions drop-down menu, select Enable RAID Controller, and then click Apply. As seen earlier, if the server is not turned off, a message is displayed to turn off the server.
Click OK and then repeat the steps to enable the controller. The system will reboot which might take a while. After the system reboots, you can see that the controller is enabled. For more information visit dell.com/support.
