Dell Quick Resource Locator video. Get immediate access to detailed how-to videos using your smart phone and a model specific QR code on Dell PowerEdge servers. Be more efficient and effective managing your data center hardware with the information you need, when you need it. PowerEdge R720 GPU Card.
Removing A GPU Card:
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
Open the system.
Lift the GPU-card latch.
Open the baffle.
Grasp the GPU card by its edges and slide out the GPU card at an angle to release it from the connector on the riser card.
Disconnect the cables from the GPU card.
If you are removing the card permanently, install a metal filler bracket over the empty slot opening and close the GPU-card latch.
NOTE: You must install a filler bracket over an empty expansion slot to maintain Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow inside the system.
Close the system.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Installing A GPU Card:
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
Open the system.
Unpack the GPU cards and the GPU enablement kit.
Attach the system board support bracket for the GPU card to the system chassis using the screw provided in the kit.
Remove the cooling shroud.
Remove the heat sinks.
Install the heat sinks from the kit and reinstall the cooling shroud.
Connect the GPU power cable/s to the riser card.
Unlatch the GPU card lock on the shroud by pushing in the black tab while pulling up the blue card latch.
With the blue card latch pulled up, remove the filler brackets for the single- or double-wide GPU cards.
Replace the remaining filler brackets with those from the GPU kit.
Locate the GPU power connectors on the cable and plug them to the 6-pin and 8-pin connectors on the GPU card.
With the GPU card at an angle to the slot on the riser card, insert the connector on the edge of the card into the corresponding connector on the riser slot until the card is fully seated.
NOTE: Ensure the GPU card is installed correctly into the GPU card lock.
Press down on the GPU card lock to secure the card in position.
Ensure the GPU card is seated into the baffle and press down on the blue dot to close the baffle.
Close the system.