How to Replace Fan Gantry for PowerEdge R7625

This video will demonstrate the replacement procedure of a fan gantry for the Dell PowerEdge R7625.

In this video, we show how to replace the fan assembly on a PowerEdge R7625 before removing the fan assembly read through and follow the safety guidelines to protect your system from potential damage and ensure your personal safety.

For more information about safety guidelines, see the R7625 service manual at dell.com/support. In order to remove the fan assembly, you must first remove the cover and air shroud to remove the cover.

Use a screwdriver to rotate the lock counterclockwise to the unlocked position. Next lift the release latch until the system cover slides back, then lift the cover from the system to remove the air shroud, hold the edges of the air shroud and lift it out of the system to remove the fan cage assembly.

Lift the blue release levers then holding the release levers, lift it away from the system to install the fan cage assembly align the guide rails with the standoffs on the system press release levers to lock the assembly into the system to install the air shroud align the slot on the air shroud with the standoff on the system then lower into the system until it is firmly seated to install the cover align the system cover with the guide slots on the system and place it onto the system.

Next, close the system cover, release latch finally rotate the lock clockwise to the lock position for more information or support, visit dell.com/support.