Be sure to read and follow the safety guidelines to protect your computer from potential damage and ensure your personal safety. For more information about safety guidelines, see the owner's manual at dell.com/support. Before you begin. Turn off the computer and disconnect all the attached peripherals to remove the memory module.
Unlatch the side cover and lift it off the system. Unlatch and remove the front bezel. Find the hard drive assembly and disconnect the cables to remove it from the system. Identify the disk drive cage and disconnect the cables. Unlatch the cage to slide it out of the system. Flip the disk. Drive cage over and disconnect the cables to fully remove it from the system.
Identify and unlatch the memory module. Grasp the module by the edges to remove it from the system. To reinstall the memory module, relay it to the system. Plug in the disk drive cage and flip it over. Slide the cage in the system.
Relax it and reconnect the cables. Reconnect the hard drive assembly cables. Relax the front bezel and the side cover to the system.
For more information about your Dell system, visit dell.com/support.
