How to Replace Air Shroud for PowerEdge R660xs

This video shows the process of removing and installing the air shroud on a PowerEdge R660xs.

In this video we show how to replace the air shroud on a PowerEdge R660xs. Before removing the air shroud, read through and follow the safety guidelines to protect your system from potential damage and ensure your personal safety.

For more information about safety guidelines, see the R660xs Service Manual at: Dell.com/Support. In order to remove the air shroud you must first remove the cover.

To remove the cover, use a screwdriver to rotate the lock counterclockwise to the unlocked position. Next lift the release latch until the system cover slides back.

Then lift the cover from the system. To remove the air shroud, hold the air shroud at both ends and lift it out of the system. To install the air shroud, align it with the chassis and lower until firmly seated.

To install the cover, align the system cover with the guide slots on the system and place it one the system. Next, close the system cover release latch.

Finally, using a screwdriver, rotate the lock clockwise to the lock position. For more information or support visit Dell.com/Support.