Prerequisites
Ensure that you read the Safety instructions.
Turn off the system, including any attached peripherals.
Disconnect the system from the electrical outlet and disconnect the peripherals.
Remove the system cover.
Remove the cooling shroud.
NOTE:There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or equivalent type recommended by the manufacturer. For more information, see the safety information that shipped with your system.
Replacing the system battery:
Locate the battery socket.
CAUTION:To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery.
Place your finger between the securing tabs at the negative side of the battery connector and lift the battery out of the socket.
a. positive side of the battery connector
b. system battery
c. negative side of the battery connector
To install a new system battery, hold the battery with the "+" facing up and slide it under the securing tabs.
Press the battery into the connector until it snaps into place.
Install the cooling shroud.
Install the system cover.
Reconnect the system to its electrical outlet.
Turn the system on, including any attached peripherals.
