In this video, we'll show how to enable software raid on Dell 13th generation power age systems or later to begin the process.
Turn on the system and press F two to go to the system set up page to check whether software rate is enabled, click device settings, if software rate is not listed here, this indicates that it is not enabled, click finish to enable software raid, click system bios then status settings and then select raid mode from the embedded sata dropdown menu. Click OK.
In the saving changes dialog box to change the settings. Click back and then click finish in the saving changes dialog box, click yes, to confirm the changes here, the settings were saved successfully. Go ahead and click. Ok. Now click finish and click.
Yes. In the confirm exit dialog box to reboot the system again, press F two to go to the system set up page, then click device settings to view the enabled Dell per S 1 30 configuration utility for more information, visit dell dot com forward slash support.