How to Convert to Rack Mount for Precision 5820-7820

This video will demonstrate the converting procedure of a Rack Mount for the Precision 5820-7820.

To remove the side cover:
Press the latch.
Pull the latch [1] upward and slide the side cover outwards to remove it from the system [2].
Remove the 3 screws that secure the top cover to the system chassis [1].
Slide the top cover outwards and lift it away from the system [2].
Align and install the side cover to the system.
Before installing the rails, ensure to remove the six (M5x6) screws secured to the screw slots in one of the rail.
Align the hooks in the rail to the hook slots on top of the system chassis.
Fasten the two (#6-32x1/4) screws to secure the rail on the top of the system chassis.
Fasten the three (M5x6) screws removed from the rail in step 6, to secure the rail to the system.
Align the screw holes on the other rail to the screw holes on the bottom of the system and fasten the remaining three (M5x6) screws to secure the rail.
Align the screw holes on the rack ears with the screw holes on the rails on the top and bottom of the system.
Fasten the 4 (M3.5x8.4) screws on the top and bottom of the system to secure the rack ears to the system.
Install the system in the rack.