How to Replace GPU Fan Board for PowerEdge XE9680

This video will demonstrate the replacement procedure of the GPU fan board for the PowerEdge XE9680.

Prerequisites
Follow the safety guidelines listed in the Safety instructions.
Power off the system and all attached peripherals.
Disconnect the system from the electrical outlet and disconnect the peripherals.
If applicable, remove the system from the rack.
Remove the system cover.

Removing a GPU fan module:
Press the latch on the GPU fan module.
Using other hand pull out the GPU fan module to disconnect from the connector on the rear fan cage assembly.

Installing a GPU fan module:
Align the GPU fan module with the GPU fan cage wall.
Using both hands push the GPU fan module to the end until it clicks into place.

Replace the system cover.
If applicable, install the system into the rack.
Reconnect the peripherals and connect the system to the electrical outlet, and then power on the system.