Prerequisites
Follow the safety guidelines listed in the Safety instructions.
Removing the front bezel:
Unlock the bezel.
Press the release button, and disengage the left end of the bezel.
Unhook the right end, and remove the bezel.
Removing a drive:
Press the release button, and slide the drive blank out of the drive slot.
Removing the drive carrier:
Press the release button to open the drive carrier release handle.
Holding the drive carrier release handle, slide the drive carrier out of the drive slot.
Installing a drive:
Insert the drive blank into the drive slot until the release button clicks into place.
Installing the drive carrier:
Slide the drive carrier into the drive slot.
Close the drive carrier release handle to lock the drive in place.
Installing the front bezel:
Align and insert the tabs on the bezel into the slots on the system.
Press the bezel until the release button clicks in place.
Lock the bezel.
