In this video, we show how to replace a the 5G optical fiber port module in a Dell Pro Micro Thin Client Q9M1260. Before working inside your system, review all safety guidelines to protect the system and ensure your personal safety. For full safety information, view the Service Manual at: Dell.com/Support.
Before you begin, remove the side cover. To remove the 5G optical fiber port module, loosen the captive screws. And lift the module from the system board. Slide at an angle. Take it away from the system. If you are installing the 5G optical fiber port module for the first time, you will need to remove the port cover. Push against the port cover as shown until it comes off.
To install the 5G optical fiber port module. insert the module into the slot at the back panel of the system. Align the tabs with the triangle markings on the chassis. Then press the module onto the system board until it clicks in place. Tighten the captive screws to secure it. For more information or support, visit: Dell.com/Support.
