Learn how to replace the M.2 2230 solid-state drive on your Inspiron 7506 2-in-1 Black. This video helps to guide you through the steps for removing and installing a solid-state drive on your Inspiron 7506 2-in-1 Black. Before removing the M.2 2230 solid-state drive, read through the safety guidelines to protect your computer from potential damage and ensure your personal safety. Ensure that you turn off your computer and all attached peripherals. For more information about safety guidelines, see the Inspiron 7506 2-in-1 Service Manual at https://www.dell.com/support.
In this video, we will demonstrate how to replace the M.2 2230 Solid-State Drive, or SSD. Before removing the SSD, read through the safety guidelines to protect your computer from potential damage and ensure your personal safety.
For more information about safety guidelines, see the Inspiron 7506 2-in-1 Black Service Manual at Dell.com/Support. Before you begin, ensure that you turn off your computer and disconnect all attached peripherals.
Ensure that you create a recovery drive and back up all data before removing the M.2 2230 solid-state drive. To remove the base cover, remove the six screws that secure the base cover to the palm rest and keyboard assembly.
Then, loosen the three captive screws that secure the base cover to the palm rest and keyboard assembly. Starting from the top-right corner, use a plastic scribe to pry off the base cover from the palm rest and keyboard assembly.
Disconnect the battery cable from the system board. Turn the computer over and open the display. Press the power button for 15 seconds to drain the flea power.
Now, let's remove the M.2 2230 solid-state drive. First, remove the screw that secures the SSD thermal bracket to the palm rest and keyboard assembly.
Then, lift the solid-state drive thermal bracket off the palm rest and keyboard assembly. Remove the screw that secures the SSD to the SSD bracket. Slide
and remove the SSD from the SSD slot. You have successfully removed the M.2 2230 solid-state drive. Now, let's see how to install the M.2 2230 solid-state drive.
Align the notch on the SSD with the tab on the SSD slot. Then, slide the SSD firmly into its slot at an angle. Replace the screw that secures the SSD to the SSD bracket.
Align the screw hole on the SSD thermal bracket with the screw hole on the palm rest and keyboard assembly. Replace the screw that secures the SSD thermal bracket to the palm rest and keyboard assembly.
Connect the battery cable to the system board. To install the base cover, align the screw holes on the base cover with the screw holes on the palm rest and keyboard assembly, and then snap the base cover into place.
Replace the six screws that secure the base cover to the palm rest and keyboard assembly. Tighten the three captive screws that secure the base cover to the palm rest and keyboard assembly.
The M.2 2230 solid-state drive installation process is now complete. For more information about this procedure and more, see the Service Manual document at Dell.com/Support.
