How to replace the M.2 2280 Solid-State Drive (SSD) on Dell Pro Micro Plus QBM1250/Dell Pro Micro QCM1250/QCM1255

This tutorial provides step-by-step instructions on how to remove and install the M.2 2280 solid-state drive on your Dell Pro Micro Plus QBM1250/Dell Pro Micro QCM1250/QCM1255. Before you begin, power off the computer, and disconnect all the attached peripherals. Ensure that you always use ESD protection when working inside the system.

In this video, we show how to replace the M.2 2280 solid-state drive on the Dell Pro Micro Plus QBM1250, the Dell Pro Micro QCM1250, or the Dell Pro Micro QCM1255. Before you begin, turn off the computer and disconnect all attached peripherals. Ensure that you always use ESD protection when working inside the computer.

To begin, place the computer on its side with the side cover facing up. Now, loosen the rear thumb screw that secures the side cover and slide it off the chassis. Inside the chassis, locate the solid-state drive slots.

To remove the SSD, remove the screw securing the SSD. Gently slide and lift it out. Now, to install the SSD, align the notch on the SSD with the tab on its slot and slide it in. Press the SSD down and align the notch with the screw hole on the mount. Secure the SSD with the screw.

Now, to install the side cover, align the tabs on the side cover with the slots on the chassis. Slide the cover back into place and tighten the thumb screw. For more information or support, visit: Dell.com/Support.