In this video, we show how to replace the Wi-Fi 6 internal antenna, location two, in a Dell Pro Micro Thin Client Q9M1260. The actions in the following video should be performed a Dell certified technician.
Before working inside your system, review all safety guidelines to protect the system and ensure your personal safety. For full safety information, view the Service Manual at: Dell.com/Support Before you begin, remove the side cover and the Wi-Fi 6 wireless card.
To remove the Wi-Fi 6 internal antenna, location two, unroute the cable from the clip, And unroute it from the routing guides. Loosen the captive screw that secures the antenna cover. Slide and take out the antenna cover from the chassis. Remove the screw that secures it to the chassis. Slide and remove it from the chassis.
To install the Wi-Fi 6 internal antenna, location two, align and place the internal antenna. And fasten the screw that secures it to the chassis. Align and place the antenna cover to the chassis. Then, tighten the captive screw. And then, route the antenna cable through the routing guides. Then, route through the clips. For more information or support, visit: Dell.com/Support.
