How to Replace Fan for PowerEdge T620

This video will demonstrate the replacement procedure of a Fan for PowerEdge T620.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
CAUTION: The cooling fans are hot-swappable. To maintain proper cooling while the system is on, replace only one fan at a time.
CAUTION: Do not operate the system with the cover removed for a duration exceeding five minutes.
NOTE: The procedure for removing an individual fan from the cooling-fan assembly and the cooling shroud is identical.

Removing A Cooling Fan:
Open the system.
Press the fan release tab and lift the cooling fan out of the cooling-fan assembly.

Installing A Cooling Fan:
Align the plug at the base of the cooling fan with the connector on the system board.
Slide the cooling fan into the securing slots until the tabs lock into place.

Close the system.