In SANnav Management Portal, when you want to perform maintenance on a switch, such as upgrading firmware or gathering Supportsave data, you can put the switch in maintenance mode to stop monitoring performance and receiving alerts.
Hello everyone.
In this video we will see how to put a Brocade Switch in a Maintenance Mode in SANnav. The question arises why and when to put a switch in maintenance mode. To answer that in SANnav Management Portal when you want to perform maintenance on a switch such as firmware upgrade or gathering support save data you can put the switch in maintenance mode to stop monitoring performance and receiving alerts.
Putting a switch in maintenance mode is done at the chassis level. Now let us log to SANnav to put a switch in maintenance mode. In order to open the details page of the chassis click "Inventory" in the navigation bar and then select "Chassis" from the drop- down list. Locate the chassis and then click the down arrow in the right most column and then select "View" from the action menu.
This is how the chassis details looks. Now scroll down to the bottom of the details page and select one of the maintenance mode options. Here set maintenance mode is used to put the chassis in maintenance mode immediately. Schedule maintenance mode is to set a time in the future for maintenance mode to start. Now let us select "Set Maintenance Mode" to put the switch in a maintenance mode immediately.
You can optionally set an end date and time when maintenance mode ends. Now click click save. This is the acknowledgement from SANnav that the changes made will be in effect. Click close. Here we can see that the selected chassis has been put in a maintenance mode as it's not highlighted like other chassis which is ready for any configuration changes.
If you do not wish to set an end date when the firmware upgrade or other maintenance operations are complete you can click on the same chassis to go back to the same details page and then clear the set maintenance mode and then click save to put the switch back in normal mode. This is how we put the switch or chassis in a maintenance mode.
Thanks for watching.
