Be sure to read and follow the safety guidelines to protect your computer from potential damage and ensure your personal safety. For more information about safety guidelines, see the owner's manual at dell.com/support.
Before you begin, turn off the computer and disconnect all the attached peripherals To remove the hard drive. Loosen the two screws on the side cover and slide the cover off the system. Identify the hard drive and disconnect the cables.
Remove the screw and lift the hard drive out of the system. Turn the hard drive 90 degrees and remove the four screws to fully remove it from the system.
To reinstall the hard drive, Turn the hard drive 90 degrees and place it back in the system. install the four screws. Install the screw and reconnect the cables. Secure the side cover by tightening the two screws.
For more information about your Dell system, visit dell.com/support.
